Tips For Braiding With Paracord

Before you begin braiding anything with paracord, it is important to buy enough cables, given that the length of paracord you should buy depends on the type of braid you will do.

For smaller accessories such as a watch or bracelet band, about 15 feet should be enough. For a simple braid, a short length of rope can be used but generally, the rule of thumb is to cut out or order more than you think you'll need to be on guard. You can buy paracord rope through

For those of you who are just starting or are interested in starting their first projects with the greatest amount of ease, it would be better to start with a typical braid and use objects you can wrap paracord around each end while braiding to ensure that it is as tight as possible.

Goldenrod 425 Paracord

For a typical braided pattern, depending on the width of the item you are thinking of making, you will need to wrap at least 3 to 4 loops around the two nails fixed or post-type fixtures.

Cobra weaves a little more complex, but still pretty easy. Braid type normally used in the manufacture of belt paracord survival. When using cobra weave you do not need to post remains as mentioned earlier, you, however, need a long enough length of paracord.

Start by folding the circular paracord in the middle and upper end so that the weaving process is a little faster and easier, otherwise you will have to pass a lot of wires down and on top of each other can be very tedious and tiring after a while.

Now, take a left end of the paracord and pass under the center strands, then take a right past the end of the lower left end, upper central strands and through the loop created by the left and then pull out the slack. Repeat the steps, but start with the right end of the cable this time.

Know About Paracord Survival Bracelet

This article will help create a standard Cobra type paracord survival bracelet. You can make a survival bracelet with one color, two tones or what is called the "elite" style. There are many guides and videos online for making this bracelet.

In choosing to make a bracelet, you must decide how you want the bracelet to be connected, or closed. There are many methods with pros and cons for each. If you are looking to buy paracord bracelet buckle then you can visit

Closing Style:

Side-release buckles: These are the most commercially available closures found on paracord survival bracelets that you find at most sporting goods stores. They are generally hard plastic that is quite reliable.

Knots: This is the method I like best for making bracelets. There is no hardware to buy. The key to this style is making good diamonds know to repeat the loop. This knot can be loosened or tightened if you make a mistake in the measurement.

Knots and buttons: I have made a number of these and they look really fun. I attach a BDU green OD style button to my bracelet. The law enforcement agency where I work has a uniform color of green and gold. I inserted a gold thread to sew the green button on my thin blue elite line paracord bracelet.

Shackle: This is additional hardware that must be purchased, usually online to get a small size.

At this point, you should have an amazing looking bracelet that not only looks fashionable but can also help you in an emergency by using a paracord. The benefits of this particular model are showing your support to law enforcement officers and the difficult work they do every day.